Calculator Laser, plasma, waterjet
Laser cutting cost calculator from DXF
Drop a DXF of a flat part. You get the cut length, the number of pierces, parts and holes, the net area and the part weight, and from your machine’s speed and rates, the cutting time and cost.
01 Method
What is measured in the DXF
- Reads the geometryLines, arcs, circles, polylines with bulges, ellipses, splines and blocks (including arrays and mirrored inserts), in the drawing’s units. Text, dimensions and hatching are ignored, as a cutting machine would.
- Chains the contoursTouching segments (within 0.01 mm) are joined into closed outlines. Each closed outline is one pierce; outlines inside others are holes.
- Measures and pricesCut length is the total length of every contour. Cutting time is cut length ÷ cutting speed plus one pierce time per contour. Weight is net area × thickness × density.
Cut lengths match the reference DXF library ezdxf to within 0.002 % on its sample files.
02 Pricing
How laser cutting is priced
Most job shops price a flat part from four numbers:
- Machine time: cut length at the speed for the material and thickness, plus pierces. Thick plate cuts much slower, and each pierce can take from a fraction of a second on thin sheet to several seconds on thick plate.
- Hourly rate: typically 60 to 200 per hour for a fibre laser, covering the machine, gas, power and operator.
- Material: the part’s weight, or the share of the sheet it uses, at the price per kilogram.
- Setup and finishing: programming, loading and deburring, often as a minimum charge per order.
Cutting speeds depend on the machine. As a rough guide, a 3 kW fibre laser cuts 1 mm mild steel at over 10,000 mm/min and 10 mm at around 1,000 mm/min; use your machine’s cutting tables.
03 FAQ
Questions and answers
How do I calculate the cut length of a DXF?
Add up the length of every line, arc, circle and curve that the machine will follow, after joining touching segments into contours. Drop the DXF on the calculator above and it does this for you, including splines, ellipses and blocks.
What is a pierce, and why does it cost extra?
Every closed contour starts with the beam piercing through the material before it can move. That takes time and wears the nozzle, so shops count pierces separately. A plate with six holes needs seven pierces: one per hole and one for the outline.
Is my DXF uploaded?
No. The DXF is read in your browser by a WebAssembly module and never leaves your computer.
Which DXF versions work?
ASCII DXF files from any common CAD program (AutoCAD, LibreCAD, Fusion, SolidWorks, Inkscape exports). Binary DXF is not read yet. If $INSUNITS is set, inches and other units are converted to millimetres; if it is not set, millimetres are assumed.
Does it work for plasma and waterjet too?
Yes. Cut length, pierces and areas are the same for any profile cutting process; enter that machine’s cutting speed, pierce time and hourly rate.
Can I use this in my own quoting software?
Yes. POST /v1/analyze with a DXF returns the same numbers as JSON, with thickness=, density=, cut_speed= and pierce_time=; /v1/render draws the part as a plate. See the API docs.
Instant quotes for sheet parts
Cut length and pierces from DXF, sheet thickness, bends and holes from STEP, and a preview of the part, from one API with published prices.
More free tools: 3D print time and cost · STL volume and weight · STEP to PNG · 3D viewer